High quality steel ENOCUT cutting bar, a system totally manufactured in-house by Enorossi.
Rear-mounted disc mower equipped with hydraulic lift, automatic safety release to protect the bar from any obstacles, over running cardan shaft, protection cover and swath disc.
ENOROSSI lifting technology is a warranty. When the mower goes down, it always touches the ground with the external part. At the end of the field the first part lifting is the inner part. This way it is possible to fully protect the turf. The lifting is done by a single-acting hydraulic distributor. It is very easy to go from working position to transport position, you don’t even need to get off the tractor.
|Model||N° discs||Cutting width||Working speed||Blades for disc||RPM||HP||Weight|
|DM 4||4||167 cm. / 5.5 ft.||10-14 km/h / 6-9 Mph||2||540 rpm||35 HP||420 Kg. / 925 Lbs.|
|DM 4 3C||4||167 cm. / 5.5 ft.||10-14 km/h / 6-9 Mph||3||540 rpm||35 HP||420 Kg. / 925 Lbs.|
|DM 5||5||205 cm. / 6.2 ft.||10-14 km/h / 6-9 Mph||2||540 rpm||40 – 50 HP||460 Kg. / 1014 Lbs.|
|DM 6||6||245 cm. / 8 ft.||10-14 km/h / 6-9 Mph||2||540 rpm||50 – 60 HP||500 Kg. / 1103 Lbs.|
|DM 6 3C||6||245 cm. / 8 ft.||10-14 km/h / 6-9 Mph||3||540 rpm||50 – 60 HP||500 Kg. / 1103 Lbs.|
|DM 7||7||280 cm. / 9.2 ft.||10-14 km/h / 6-9 Mph||2||540 rpm||70 – 80 HP||640 Kg. / 1411 Lbs.|
|DM 8||8||320 cm. / 10.5 ft.||10-14 km/h / 6-9 Mph||2||540 rpm||80 – 90 HP||690 Kg. / 1522 Lbs.|
|DM 8 3C||8||320 cm. / 10.5 ft.||10-14 km/h / 6-9 Mph||3||540 rpm||80 – 90 HP||690 Kg. / 1522 Lbs.|
Easy disc coupling pin replacement in case of breakage.
Arm support that helps cutting tall grass in heavy conditions.
Standard disc and drum for windrow formation.